I/O MODBUS - 4 AO 4-20mA, 0-10Vdc

Modbus I/O module with 4 analog output 

>> These modules, both in digital and analog version, are interfaced with the CNC Unit via a serial port RS485 using Modbus RTU protocol at a maximum speed of 115Kbaude. They can be installed on a DIN rail up to 1.000 meters distance with the possibility of replacing them without disconnecting wires. All modules have a 24V power supply. Digital I/O modules support 24V optoisolated inputs and 0,5A or relay output. Analog modules are available both for ±10V and 4-20mA and have a 16bit resoution.

General characteristics:
Wiring/Mounting:  Removable screw connector with possibility to replace electronics without disconnecting wires/ DIN rail
Insulation:  I/O opto-isolated from bus and power supply
Power supply:  10 to 30 Vdc
Dimension:  100 x 120 x 17.5 mm
Baudrate:  up to 115Kbps

ANALOG I/O : 4 analog output 0÷10V
Output: Output voltage: 0 ÷ +10V (current ±10mA); Update frequency: 0,06 ÷ 4 sec; 16 bit resolution