DRIVE OS3 OS-WIRE 400V-A05 SINC2 - Retrofit

New item

Servodrive OD600 5A continuous, 10A peak, SINCOS motor transducer

The drive is electrically compatible with OS3 OS-Wire B-size 400V-A05 with SINCOS Transducer models and it replaces the p/n 97942050N, 97972050S.

• The firmware is specific for these drives and it is, from the functional point of view, completely compatible with that of the B-size
• The connectors on the front panel are a little bit moved (few millimeters) but in the same original area
• The RST power connector (bottom side) is now 3 wire connections instead 4. The 3 wire connections plug connector is supplied with the drive
• The OD600 drive do not generate internally the 24V power supply for the control board, in case of black out. If the function is required, an external “buffer” must be used. Prima Electro can offer the device 97840003M able to maintain the 24VDC power supply to up to 5 drives for 1-1,5 sec
• The capacitors on the bus of the OD600 are smaller (in particular for the 15/30 Amp size). In case of use in heavy conditions (continuous and long accelerations and decelerations) an external clamp resistor may be required. More likely in Automation applications than Machine Tools ones.

ATTENTION:
This model is deeper (8mm) than the original drive