OS-WIRE COMPACT OPERATOR CONSOLE (OS8737)

New Item

Compact Operator Console with OS-Wire interface for 10/510 CNC (OS8737 interface board)

This console is equipped with the following controls:

• CYCLE START, HOLD and RESET luminous buttons
• Encoder type selector to set feedrate (0-125% 20 steps/rev)
• Encoder type selector to set spindle rotation speed (75-125% 20 steps/rev)
• Encoder type selector to set feedrate in manual and/or rapid mode (0-100% 20 steps/rev)
• Operating mode selection (Automatic, Semiautomatic, MDI, Manual, Jog, Axis reset) luminous buttons
• Digital I/Os (7 inputs and 7 configurable I/Os) are available on a connector at the back of the console; they can be used to customise the console and can be managed by a PLC
• 1 22-diameter hole is available for the emergency button.

24VDC only power supply

Note:
the console is enabled/disabled by the PLC. The PLC can also change the default values for the feed, speed, manual and/or rapid feed selectors. The values that can be changed are: step size, number of steps per rev and selector rotations to go from the minimum to the maximum value.
You can fit several consoles to a system and activate them simultaneously.

Important:
It replaces the previous version 93000650A mo longer available.